Emergency
communication
from elevator
European standards EN 81-28 and EN 81-70 require two-way emergency communication from the elevator cabin in order to avoid passangers being trapped. There are several possibilities how to tackle this requirement and solutions below allow you to choose best technology and products.
Solution for emergency communication from elevator
European standards EN 81-28 and EN 81-70 require two-way emergency communication from the elevator cabin in order to avoid passangers being trapped. There are several possibilities how to tackle this requirement and solutions below allow you to choose best technology and products.
- $Click on the hotspot in the diagram for more information
- "Click on the hotspot in the diagram for more information
2N® LIFT1
The 2N® Lift1 communication solution is designed for two-way emergency communication in the elevator.
2N® EASYGATE IP
The end of 2G and 3G networks is approaching. Transition seamlessly to modern 4G with the 2N® EasyGate IP.
2N® LIFTGATE
The 2N® LiftGate IoT gateway will transform a regular elevator into a modern IP solution for the 21st century.
2N® LIFT1
The 2N® Lift1 communication solution is designed for two-way emergency communication in the elevator. Its typical use is in elevators where communication is required between the cabin and the control centre or machine room.
- A comprehensive solution for single lift
- Powered over phone line
- Supports CPC and P100 protocols
POWERED
OVER PHONE LINE
Take advantage of a single pair of wires for communication and power supply combined. When connected to the 2N® EasyGate PRO, the GSM/UMTS gateway, the unit is kept powered up even in the event of a main power failure.
SIMPLE CONFIGURATION
The configuration can be done locally with the supplied configuration software application or remotely using the voice menu. When connected to the 2N® EasyGate PRO GSM/UMTS gateway, configuration can be changed also using SMS service.
A COMPREHENSIVE SOLUTION FOR ONE LIFT
You can rely on 2N® Lift1 for emergency communication from the lift cabin. Two additional audio units and machine room unit can be attached.
STANDARDS
AND CERTIFICATIONS
The high quality design and compatibility with the required standards is proven by TÜV certification EN 81-28/70.
2N® EASYGATE IP
The end of 2G and 3G networks is approaching. Transition seamlessly to modern 4G with the 2N® EasyGate IP. Connect an analogue elevator communicator to the gateway. This will ensure voice or data (VoIP) communication via a mobile network with an operations centre. If you are using an old mobile network for emergency communication, you can continue to do so. When you’re ready to transition to 4G, all you’ll need is a single click in settings. The gateway also supports VoIP (SIP) technology, which is the only technology to guarantee reliable transmission of a DTMF signal.
- 2G, 3G and 4G support
- Reliable transmission of DTMF
- VoIP is the future
2G, 3G AND 4G
SUPPORT
The gateway supports 2G, 3G and 4G networks with and mainly VoIP. Install the gateway already now and continue using the old network. When the time comes, you can switch to 4G.
RELIABLE TRANSMISSION
OF DTMF
2G, 3G and VoLTE frequently distort the DTMF signal. Only VoIP technology using a SIP protocol guarantees reliable transmission of DTMF, which is essential for identification of the lift.
BACKUP OPERATION USING BATTERY POWER
The 2N® EasyGate IP works if there is a power cut. The backup battery can keep the gateway working. Users in the lift can always call for help and you will be in compliance with the legal standards.
CONFIGURATION
IN 2 MINUTES
Any technician can easily set up the gateway, even without special expertise. Configuration is automated and takes no more than two minutes.
2N® LIFTGATE
The 2N® LiftGate IoT gateway will transform a regular elevator into a modern IP solution for the 21st century. Plus, you needn’t worry if there’s a UTP cable in the elevator. IP connectivity in the elevator is secured using 2 wires in the travelling cable. 2N® LiftGate combines the functions of an LTE router, a backup power supply, a converter (2-wire to IP) and a switch all in one unit. Install just 1 product instead of 4 and save time and money.
- IP connectivity over 2-wire
- Backup power supply
- All in one IoT device
IP CONNECTIVITY
OVER 2-WIRE
Install the 2N® LiftGate in the lift machine room, a 2N® LiftGate Cabin Switch on the roof of the cabin and connect them via 2 wires in the travelling cable.
UP TO 4 IP DEVICES
IN THE CABIN
You can connect an IP communicator, a camera, a display for ads or a reader to the 2N® LiftGate Cabin Switch. There’s even a backup 12 V output for emergency lighting.
COMMUNICATION
VIA SIM AND WAN PORT
You only need one SIM card to make calls, for data communication with the gateway, the controller or access control system. A backup option can be provided in the form of a WAN port or second SIM.
BACKUP
POWER SUPPLY
Ensure emergency communication in the lift even during power cuts. The 2N® LiftGate solution includes UPS to power critical communication equipment and emergency lighting.